Quality & Compliance
Certified,
not claimed.
Every LICLLAB luminaire leaves Susegana with a documented chain of evidence — third-party tested, independently audited, and traceable to the batch it was built in.
Certification files, declarations of conformity and test reports are available to specifiers on request for any product in the catalogue.
The Certifications
Four marks that
carry the product.
A CE mark is a manufacturer's own declaration. ENEC and CB are not — they require an accredited laboratory to test the luminaire and an inspector to visit the factory. Our Limitless and Strip LED families, indoor and outdoor, carry both. CE certificates are held for selected products and issued per reference; ISO 9001:2015 governs the system behind all of them. Select any mark for its exact scope.
What it certifies
ISO 9001:2015 audits the system, not a single product. It covers how a design brief becomes a drawing, how components are sourced and inspected, how each luminaire is traced through assembly, and how a complaint is handled once the fixture is on site. Surveillance audits are annual; recertification is on a three-year cycle.
Scope
- StandardISO 9001:2015
- ScopeDesign & manufacture of LED luminaires
- SiteSusegana (TV), Italy
- Audit cycleAnnual surveillance
What it certifies
ENEC is the European mark for luminaire safety issued only by accredited certification bodies. The luminaire is tested against the EN 60598 series and the factory is inspected on a recurring basis to confirm that what ships matches what was tested. For specifiers writing to European standards, ENEC is the strongest available evidence that a fixture's safety claims were verified by someone other than the manufacturer.
Certified families: Limitless and Strip LED, in both indoor and outdoor configurations.
Scope
- Product familiesLimitless · Strip LED
- ApplicationIndoor & outdoor
- StandardsEN 60598-1 / -2 series
- TypeThird-party certification
- FactoryPeriodic inspection
- RecognitionAll CENELEC member states
What it certifies
The CB Scheme is the IECEE's system of mutual recognition. A luminaire tested once by a recognised National Certification Body produces a CB Test Certificate and Report that member countries accept as the basis for their own national approval. For projects in the Gulf, Asia or the Americas this removes the delay of re-testing — a decisive factor on export schedules for our Dubai and Riyadh offices.
Certified families: Limitless and Strip LED, in both indoor and outdoor configurations.
Scope
- Product familiesLimitless · Strip LED
- ApplicationIndoor & outdoor
- SchemeIECEE CB
- StandardsIEC 60598 series
- DeliverableCB Test Certificate + Report
- UseBasis for national approvals
What it certifies
CE marking confirms that a luminaire meets the applicable European directives — Low Voltage, Electromagnetic Compatibility, RoHS and Ecodesign — supported by a technical file held at the factory. LICLLAB holds CE certificates for selected products, and a signed Declaration of Conformity is issued against the specific product reference and project name for handover documentation.
Coverage: confirmed per product reference. Send us the code and we will confirm what is held before you specify.
Directives
- CoverageSelected products
- SafetyLow Voltage Directive
- EMCElectromagnetic Compatibility
- SubstancesRoHS
- EnergyEcodesign / ErP
Scope note — ENEC and CB certification currently covers the Limitless and Strip LED families in indoor and outdoor versions. CE certificates are held for selected products and confirmed per reference. All production is carried out under an ISO 9001:2015 audited system. Certification of further families is ongoing — ask us for the current status of any product code before you specify it.
Beyond the marks
Performance
we also verify.
Certification proves a luminaire is safe and legal. These are the properties that decide whether it survives fifteen years on a façade in the Gulf, at the edge of the Adriatic, or under an alpine winter.
In the laboratory
What each fixture
goes through.
Certification is the outcome of a protocol we run continuously, not an event we prepare for once. The stages below apply to every product family in the catalogue.
Photometric measurement
Luminous flux, intensity distribution, efficacy and colour data measured and issued as IES and LDT files for use in Dialux and Relux.
Colour verification
Every batch checked for CRI above 90 and colour consistency within a 3-step MacAdam ellipse across the 2700K–5000K range.
Ingress and sealing
Epoxy encapsulation and anti-wicking cable technology tested to IP67, including immersion and pressure-differential cycles.
Thermal endurance
Junction temperature held within design limits through extended burn-in, confirming the L-rating quoted on the datasheet.
Electrical safety & EMC
Dielectric strength, earth continuity, surge immunity and emissions tested against the IEC and EN 60598 requirements.
Corrosion resistance
Salt-spray exposure on housings and fixings for coastal and marine installations such as Marsa Al Arab and Arsenale Nord.
Documentation
Files for
your submittal.
Certificates and declarations for tender and handover packages. Product-specific test reports are issued on request against a project reference.
The commitment
Backed for five years,
on every continent
we ship to.
The warranty is written against the same test data the certification is built on. Spare optics, drivers and gaskets are held for the supported life of each product family, so a repair on a landmark façade does not become a redesign.
Specifiers & procurement
Need a certificate for a live tender?
Send the product reference and the project name. Documentation is issued from Susegana, Dubai or Riyadh.
Request documentation